Model No. DMC-TZ4/DMC-TZ11 Before use, please read these instructions completely. This manual is based on the DMC-TZ5 model. Product illustrations and screens may vary. QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom.
Page 2
We would like to take this opportunity to INSTALLED NEAR THE EQUIPMENT The location of the fuse differ according thank you for purchasing this Panasonic AND SHALL BE EASILY ACCESSIBLE. to the type of AC cable (figures A and B).
Set the mode dial Press the shutter button and take pictures To play back the pictures Note 1. Set REC/PLAY Example screens displayed in this manual are for DMC-TZ5 model. switch to 2. Select the picture you want to view. DMC-TZ4/DMC-TZ11: Previous...
With DVD recorder Save to DVD or hard disk ● AV cable (supplied) Sounds of zoom and other operations may be recorded. Can be used on SDHC memory card-compatible devices. DMC-TZ5/DMC-TZ15 only See respective products’ instruction manuals for details. VQT1Q15 VQT1Q15 VQT1Q15...
BEACH/SNOW ....50 self-timer ......42 • FORMAT ...... 27 • AERIAL PHOTO/ • LANGUAGE UNDERWATER/MULTI ASPECT Taking pictures with • DEMO MODE ... 51 (DMC-TZ5/DMC-TZ15 Only) exposure compensation ... 43 • EXPOSURE ...... 43 • AUTO BRACKET ....43 VQT1Q15 VQT1Q15...
Page 6
Using REC menu ................55 motion pictures Viewing on TV screen ..86 • PICTURE SIZE ................55 ..68 • View on TV with (DMC-TZ5/DMC-TZ15 only) component terminal ... 87 • QUALITY ..................55 • ASPECT RATIO ................56 Different playback methods... 69 •...
• Do not press the lens or the LCD monitor. • Do not leave in direct sunlight. AC Cable Panasonic will not provide compensation Do not get the camera wet or insert even if damage is caused by faults with...
AV OUT / DIGITAL socket In this manual, direction (P.40) (P.20) buttons to be pressed (P.81, 83, 86) will be shown in grey, or DC IN socket (P.81, 83) with ▲▼◄►. Always use a genuine Panasonic AC adaptor (optional). VQT1Q15 VQT1Q15...
DMC-TZ4/DMC-TZ11 Battery will be warm during charging and for some time thereafter. Always use genuine Panasonic batteries. Battery will run out if not used for long periods of time, even after being charged. If you use other batteries, we cannot guarantee the quality of this product.
‘PLEASE SET THE CLOCK’ will be displayed Compatible memory cards (optional) when power is turned on for the first time. SDHC memory card The following SD standard-based cards (Panasonic brand recommended) Switch • SD memory cards (8 MB - 2 GB) (LOCK) •...
REC menu switch (REC/PLAY switch Changing photography preferences (P.55-63) • Make settings such as white balance, sensitivity, aspect Shutter button ratio, and picture size. (Screen example: DMC-TZ5) (Screen example: DMC-TZ5) Selecting menu type Highlight Select and return PLAYBACK MODE menu...
Make general camera settings such as adjusting the clock, extending the battery life, Using SETUP menu Preparations and changing the beep sounds. ‘CLOCK SET’, ‘AUTO REVIEW’ and ‘ECONOMY’ are important for clock setting and Item Settings, notes battery life. Be sure to check these before use. (Setting method : P.20) BEEP LEVEL BEEP : Mute/Low/High...
PictBridge (PTP) : Select when connecting to a mode, or pictures with audio, auto review performed computer or printer with PictBridge-compatible printer regardless of setting. ( DMC-TZ5/DMC-TZ15 only) USB connection cable. • Motion pictures cannot be automatically reviewed. PC: Select when connecting to a computer...
Using SETUP menu Preparations (Continued) Item Settings, notes Item Settings, notes YES/NO NTSC/PAL FORMAT VIDEO OUT Use when ‘BUILT-IN Change the video output • This requires a sufficiently charged battery (P.16) or AC • Operates when AV cable is connected. MEMORY ERROR’...
Taking picture with Optimum settings are made automatically from information such as ‘face’, ‘movement’, Basics ‘brightness’, and ‘distance’ just by pointing the camera at the subject, meaning that clear automatic settings pictures can be taken without the need to make settings manually. Please set the clock before taking pictures (P.19).
Taking pictures with your Basics Using REC menu (P.55) to change settings and set up your own recording environment. own settings Turn on the power Align focus for desired composition Status indicator illuminated for Shutter button Useful when subject is not in centre of picture. approx.
Extra optical zoom cannot be used in the following cases: (MOTION PICTURE mode), ‘HIGH SENS.’, ‘HI-SPEED BURST’, and ‘MULTI What is Extra optical zoom (EZ)? ASPECT’ (DMC-TZ5/DMC-TZ15 only) scene modes If, for example, set to ‘3M ’ (equivalent to 3 million pixels), a picture will only be When using extra optical zoom, zoom movement may stop momentarily near maximum taken of a 3M-sized central part of a 9 M (equivalent to 9.1 million pixels)
(Note that, with digital zoom, enlarging will lessen picture quality.) Set to DMC-TZ4/DMC-TZ11: 63.8 x Zoom lever Display REC menu Select ‘ON’ Scroll through pictures File number (Screen example: DMC-TZ5) Picture number/ Total pictures DISPLAY Previous Next Select ‘DIGITAL ZOOM’ Finish...
During playback zoom, motion picture playback, slideshow : Display on/off • Card switch is in ‘LOCK’ position. • Pictures not of DCF standard (P.35) During menu display, multi playback or calendar playback, ‘DUAL PLAY’ (DMC-TZ5/ Motion pictures can also be deleted.
When digital red-eye correction function operates, red-eye will be detected and Flash settings may be changed when changing recording mode. corrected automatically when the flash is emitted. (DMC-TZ5/DMC-TZ15 only) Scene mode flash settings are restored to default when scene mode is changed.
Positioning camera and subject within Applications Applications Taking close-up pictures accessible range for focus alignment (Record) (Record) To enlarge the subject, you can take pictures from even closer up than the normal focus Accessible distance from subject depends on zoom ratio. range allows (up to 5 cm for max.
Taking pictures with exposure Applications Applications Taking pictures with self-timer compensation (Record) (Record) We recommend using a tripod. This is also effective for correcting jitter when pressing the Corrects exposure when adequate exposure cannot be obtained (if difference between shutter button, by setting the self timer to 2 seconds. brightness of object and background, etc.).
UNDERWATER MULTI ASPECT (DMC-TZ5/DMC-TZ15 only) ‘PORTRAIT’,‘SOFT SKIN’,‘SELF PORTRAIT’,‘SPORTS’,‘BABY’,‘PET’,‘HIGH SENS.’‚ ’HI-SPEED BURST’, ‘MULTI ASPECT (DMC-TZ5/DMC-TZ15 only)’ (Setting is restored to ‘AWB’ when scene is changed.) The types of flash available (P.39) vary according to the scene. The scene mode flash setting is reset to the default setting when the scene mode is Functions, tips for each scene changed.
Page 24
Taking pictures according to Applications How to select a scene (P.44) (Record) the scene Using flash in scene modes (P.39) ‘SCENE MODE’ (Continued) Scene Uses, Tips Notes Scene Uses, Tips Notes Improves the skin tone of subjects for a • ‘AF MODE’ default setting is Take pictures of people and nightscapes with •...
Extra optical zoom/ Digital zoom/ shutter button is pressed fully. • Refer to ‘BABY’ (above) for other AUTO BRACKET/ HI-SPEED notes and fixed functions. DMC-TZ5/DMC-TZ15: SELF TIMER/ ASPECT RATIO/ BURST Maximum Approx. 6 pictures/sec. Take clear pictures of scenes such as •...
ISO sensitivity settings will be (Countdown for processing is redisplayed ASPECT the same for all three pictures. afterwards) (DMC-TZ5/ • The following functions cannot be Take clear pictures of fireworks in the night • Shutter speed can be set to 1/4 used.
(optional). (P.87) • Motion pictures can be recorded • fps: frames per second To release continuously up to 15 minutes. (DMC-TZ5 (EG/PR/E), DMC-TZ4 (EG/E)) ‘30fps’: for smooth picture movement Setting is released automatically one • Motion pictures can be recorded ‘10fps’: for longer motion pictures...
If actual destination is unavailable, Screen from step will then be displayed ASPECT’ (DMC-TZ5/DMC-TZ15 only) scene modes. only when camera is used for the first time select based on ‘difference with home Mosaic effect may appear depending on subject and recording conditions.
Applications Using REC menu (Continued) REC/PLAY switch: (Record) Shutter speed and ISO sensitivity are displayed in the screen for a few seconds after ASPECT RATIO recording. If interference becomes noticeable, we recommend reducing the setting, or selecting Aspect ratio of picture can be changed according to printing or playback format. ‘NATURAL’...
Applications Using REC menu (Continued) REC/PLAY switch: (Record) WHITE BALANCE METERING MODE Adjust colouring to suit light source if colours otherwise appear unnatural. You can change the position for measuring brightness when correcting exposure. Set-up: Mode dial → Press ‘MENU/SET’ → Select ‘WHITE Set-up: Mode dial →...
Settings AF area BURST setting Speed No. of pictures Spot AF No burst area 2.5 pictures/sec. (DMC-TZ5/ Fine: Max. 3 DMC-TZ15) (Max.4: DMC-TZ4/DMC-TZ11) (Burst) 3 pictures/sec. Standard: Max. 5 When using , picture may freeze momentarily before focus is aligned.
STABILIZER Cannot be used with (INTELLIGENT AUTO mode), ‘BURST’, ‘AUTO BRACKET’, or the ‘STARRY SKY’, ’HI-SPEED BURST’, and ‘MULTI ASPECT (DMC-TZ5/DMC-TZ15 only)’ scene modes. Automatically detects and prevents jitter. ‘TEXT STAMP’, ‘RESIZE’, ‘TRIMMING’, and ‘ASPECT CONV.’ cannot be used with Set-up: Mode dial →...
Useful for taking pictures of timetables and maps instead of taking memos. Taking/viewing clipboard Applications Regardless of presence of card, pictures will always be saved to clipboard folder of pictures (Record) built-in memory, so that they can be distinguished from normal pictures and viewed (CLIPBOARD) immediately.
Cannot be displayed rotated. Only when ‘INTELLIGENT ISO’ is set to ‘OFF’ Pictures taken with destination settings made in ‘WORLD TIME’ are displayed in the DMC-TZ5/DMC-TZ15 only calendar screen using the appropriate date for the destination’s time zone. VQT1Q15 VQT1Q15...
Motion pictures and pictures with audio can be deleted in the same way as for still pictures (P.36). DUAL PLAY (DMC-TZ5/DMC-TZ15 only) Displays different 2 pictures vertically. Useful for comparing pictures. Creating still pictures from motion pictures (DMC-TZ5/DMC-TZ15 only) Set-up: Press ‘MENU/SET’ → Select ‘DUAL PLAY’ (P.20) During playback, pause Create still picture Select ‘YES’...
MOTION PICTURE. MOTION PICTURE slide show (DMC-TZ5/DMC-TZ15 only) The following playback menus can be set only for categorized pictures. (P.76, 78, 79) EFFECT ‘ROTATE’, ‘ROTATE DISP.’, ‘DPOF PRINT’, ‘PROTECT’, ‘AUDIO DUB.’...
Applications Using PLAYBACK menu REC/PLAY switch: (Set mode dial to any except (View) To edit select ‘SINGLE’ in step → select picture with ◄►, and press ‘MENU/ CALENDAR SET’ → correct text and press ‘EXIT’ Select date from calendar screen to view only the pictures taken on that day (P.67). Cannot be set in ‘CATEGORY PLAY’...
16 : 9 with audio. 3.5 M description After TEXT STAMP is applied, pictures of resize: Number of pixels before/after : DMC-TZ5/DMC-TZ15 only Press display resizing cannot be resized or trimmed, and : DMC-TZ4/DMC-TZ11 only button ‘ASPECT CONV.’, ‘TEXT STAMP’ and •...
Using PLAYBACK menu Applications REC/PLAY switch: (Set mode dial to any except (View) (Continued) ‘ROTATE DISP.’ and ‘ROTATE’ cannot be used with motion pictures. ASPECT CONV. ‘ROTATE’ cannot be used with protected pictures (P.79). Some pictures taken facing up or facing down may not be rotated automatically. Convert pictures taken in for printing.
Using PLAYBACK menu Applications REC/PLAY switch: (Set mode dial to any except (View) (Continued) DPOF PRINT PROTECT Picture/picture no./date printing settings can be made for when printing with DPOF print- Set protection to disable picture deletion. Prevents deletion of important pictures. compatible shops or printers.
DPOF settings will not be copied. Turn off power before inserting or removing memory cards. Only pictures from Panasonic digital cameras may be copied. If using Windows 98/98SE, install USB driver software when connecting for first time. Original pictures will not be deleted after copying (to delete pictures → P.36).
Connecting Connecting Using with your PC Printing with other with other (Continued) devices devices Folder and file names on computer You can connect directly to a PictBridge- Turn on power of both compatible printer for printing. camera and printer You can save images to use on your computer by dragging and dropping folders and files into separate folders on your computer.
Connecting Printing with other (Continued) devices Printing multiple pictures Making print settings on camera Select ‘MULTI PRINT’ Select item Select ‘PRINT START’ in step on the (See below for details) (Make settings before selecting ‘PRINT START’) previous page Select item Select setting PictBridge PictBridge...
We recommend recording still pictures with ‘PICTURE SIZE’ of at least 2M, and motion you can view still pictures by inserting a card directly. pictures with ‘PICTURE MODE’ set to ‘16:9H’ (DMC-TZ5/DMC-TZ15 only). • Use SDHC-compatible TVs to playback images on SDHC memory cards.
Message displays Others Meanings of and required responses to major messages displayed on LCD monitor. THIS MEMORY CARD IS LOCKED MEMORY CARD ERROR PLEASE CHECK THE CARD Release using the write-protect switch on the SD memory card or SDHC memory Access to card has failed.
Page 47
2-3 pictures are taken when I press the shutter button just once. ’ (P.58). Camera set to use ‘AUTO BRACKET’, ‘BURST’, or the ‘HI-SPEED BURST’ or ‘MULTI ASPECT (DMC-TZ5/DMC-TZ15 only)’ scene modes. (P.43, 49, 51, 61) Focus not aligned correctly. How do I get the date printed? Not set to mode appropriate for distance to subject.
Q&A Others Troubleshooting (Continued) Date/age is not displayed. Recording (continued) Current date, ‘TRAVEL DATE’ (P.53), and ages in ‘BABY’ and ‘PET’ (P.48) scene Recorded pictures appear coarse, or there is interference. modes are only displayed for approx. 5 sec. after start-up, setting changes, or mode changes.
Cannot be set when any of the following are in use: ‘AUTO BRACKET’, ‘BURST’, the Not connected correctly (P.86, 87). ‘SELF PORTRAIT’, ‘HI-SPEED BURST’, and ‘MULTI ASPECT’ (DMC-TZ5/DMC-TZ15 TV input setting not set to auxiliary input. only) scene modes, MOTION PICTURE mode, or ‘AUDIO REC.’.
Do not extend the supplied cord or cable. Do not allow camera to come into contact with pesticides or volatile substances (can CIPA standards: cause surface damage or coating to peel). Using Panasonic SD memory card (16 MB) Using the • •...
Page 51
The maximum continuous recording time (up to 15 minute) is displayed on the screen. The maximum available recording time for up to 2 GB only is displayed the screen. (DMC-TZ5 (EG/PR/E), DMC-TZ4 (EG/E)) (DMC-TZ5 (PL/SG), DMC-TZ15 (GC), DMC-TZ4 (PL), DMC-TZ11 (GC)) VQT1Q15 VQT1Q15...
Burst speed DMC-TZ5/DMC-TZ15: Approx. 6 pictures/second Dimensions (excluding the DMC-TZ5/DMC-TZ15: Approx. 103.3 mm (W) × 59.3 mm (H) × 36.5 mm (D) DMC-TZ4/DMC-TZ11: Approx. 7 pictures/second projection part) DMC-TZ4/DMC-TZ11: Approx. 103.3 mm (W) × 59.3 mm (H) × 36.2 mm (D) Number of recordable Approx.