Page 3
For more information on SIM card compatibility, go to www.motorola.com/iden. Defects or damage to your Motorola phone that result from the use of non-Motorola branded or certified Accessories, including but not limited to replacement housings and or other peripheral accessories, are excluded from warranty coverage.
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i570 Model Number: H65XAN6RR4CN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a),...
Page 7
HELLOMOTO Introducing your new Motorola i570 phone. Here’s a quick anatomy lesson. Left Soft Key Perform function in lower left display. Menu Key From home screen, open main menu. Talk Key Make & answer calls. 4-Way Navigation Key Speaker On/Off Key...
check it out Home Screen Main Menu Main Menu a q b c d e f o g Customizable that can be used to open the Settings screen Press and hold the Power Key W for a few seconds, or until the screen lights up, to turn on your phone.
Page 9
Motorola reserves the right to change or modify any information or specifications without notice or obligation.
settings menu Display/Info • Wallpaper • Palette • Text Size • Home Icons • Backlight • Clock • Menu View • Large Dialing • Contrast Ext • Language Phone Calls • Set Line • Any Key Ans • Auto Redial •...
Use and Care Use and Care To care for your Motorola phone, please keep it away from: liquids of any kind Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture. extreme heat or cold Avoid temperatures below -10°C/14°F or...
essentials Caution: Before using the phone for the first time, read the Important Safety and Legal information included in the gray edged pages at the back of this guide. about this guide This guide shows how to locate a menu feature as follows: Find it: M >...
SIM card insert the SIM card Turn off your phone and remove your battery before you install or remove a SIM card. 1 Slide the latch and open the SIM card holder. essentials 2 Carefully slide your SIM card into the SIM card holder.
Invalid Battery or Unable to Charge, take the following steps: • Remove the battery and inspect it to confirm that it bears a Motorola “Original Equipment” hologram; • If there is no hologram, the battery is not a qualified battery;...
Page 18
Avoid dropping the battery or mobile device, especially on a hard surface. If your battery or mobile device has been subjected to such damage, take it to a Motorola Authorized Service Center before using. Do not attempt to dry it with an essentials appliance or heat source, such as a hair dryer or microwave oven.
battery installation 1 Slide the release button back until it releases the battery door. 2 Remove the battery door. 3 Push the battery down until it snaps in place. 4 Replace the battery door and press it gently until you hear a click. essentials...
Tip: Motorola batteries have circuitry that protects the battery from damage from overcharging. Of course, unplugging the charger from the wall will avoid current drain.
enable security You must enable security the first time you power on you phone or within 10 days of first activation. 1 Press - under Ok. 2 Your are prompted to enable security. Press - under Yes. 3 Press o to return to the idle screen. make a phone call Enter a phone number and press O to make a call or use a voice name.
Your Private ID is the number at which you receive one-to-one Private calls. Talkgroup numbers are numbers through which you receive one-to-many group calls. 1 To make a private call enter the Private ID you want to call. 2 Push and hold the PTT button. Begin talking after your phone emits a chirping sound.
1 Enter a name for the new entry. Each entry’s name can contain 20 characters. 2 Select a specific Ringer. 3 Select a type for the entry (Mobile, Private, Work1, Work2, Home, Fax, Pager, or Other). 4 Enter the number for the entry. 5 Press - under Done when finished.
Tip: If the Contacts entry you scrolled to contains a Private ID, you can make an instant Private call to that Private ID by pushing and holding the PTT button, even if the Private ID is not the type of number displayed. find your phone number and private ID Find it: M >...
option Expire After: This is the amount of time messages you send are saved at the service center if they cannot be delivered. After this period, they are discarded. Clean Up After: Set the number of days after which sent messages are deleted or the number of messages to be kept.
create and send text messages 1 From the home screen press - under Msgs > [Create Message]. Select Inbox, Sent Items, or Drafts. 2 To address the message use the keypad to enter the phone number of the person you want to send the message to and press - under Back or press - under Contcs, or press M >...
resend text messages Shortcut: From the home screen press - under Msgs > Sent Items. 1 Scroll to the message you want to resend or press the number of the message you want to resend. 2 Press - under Resend. delete sent text messages Shortcut: From the home screen press - under Msgs >...
2 Press M > Setup > Memory Size. using your handset as a modem You can use your handset as a modem with a laptop, handheld device, or desktop computer. In order to use your handset as a modem, you must create a wired connection between your handset and the other device.
main attractions PTV Features Push to View (PTV) features let you send information through Private calls. Your phone can send and receive the following items through Private calls with other phones that have this capability: • Pictures • My Info •...
If the recipient accepts the picture, their phone saves it. send a picture during a private call Note: You cannot make or receive calls while transmitting a picture. 1 While in a Private call press - under Picture. 2 Select the picture you want to send. 3 Push the PTT button to send.
Pictures you receive are saved to your phone’s memory. They are accessible through My Pictures. When you see a message asking if you want to accept the picture, press - under Yes to accept or - under No to decline. To stop the transmission before it is finished, press - under Cancel.
3 Enter the Private ID of the person you want to send your info to or press - under Browse. 4 Select a contact number from your Recent Calls, Contacts or Memo. 5 Push the PTT button to send your information.
3 Select a contact number from the Recent Calls, Contacts or Memo. 4 Push the PTT button to send. one touch PTT Find it: M > Settings > 2-Way Radio > One Touch PTT One Touch PTT sets your phone to do any of the following each time you push the PTT button: option...
or #. make a Private call or SDG call 1 Select the entries you want and press - under Done. 2 Push the PTT button. To save your selections as a SDG list press M > Save SDG. For more information about SDG lists, see on “selective dynamic group (SDG) calls”...
2 Add the phone number or email address. 3 Select from Contacts or Recent Calls. 4 Press O. Tip: To remove a phone number or email address from the list of message recipients, scroll to the phone number or email address and press - under Remove.
reply to a message You can reply to a message while you are viewing it, or while a previously viewed message is highlighted in the message center. You cannot reply to unread messages. 1 View the message you want to reply to. 2 To reply to the sender only, press - under Reply or - under Reply All.
Tip: To view or listen to the item before attaching it, highlight it and press - under View or Play. If you want to attach more items, select [New Attachment]. 4 When you are finished, press - under Done. create a new voice record You can create a new voice record to send with a message: 1 Press M or select Attach >...
You can continue to create the message. The version you saved in the Drafts folder will not change. send a draft Shortcut: From the home screen press - under Msgs > Drafts. 1 Select the draft you want to send. 2 Press M >...
Shortcut: From the home screen press - under Msgs > Sent Items. 1 Scroll to the message you want to resend. 2 Press Resend. Note: If your message was sent successfully, Resend will not appear as an option. check delivery status If a message was successfully sent and you set the message to give a report confirming delivery, you can check the delivery status:...
If a message contains a picture or an audio recording as an attachment, open the attachment to view the picture or play the audio recording. open attachments 1 View the message. 2 Highlight the attachment you want to open. Attachments appear at the end of a message.
From field, the To field, the Cc field, the subject line, or the body of the message, you can call or send a call alert to that number. send a call alert 1 View the message. 2 Highlight the Private ID or Talkgroup ID you want to alert.
Page 42
Contacts type you want to assign the number or email address. 6 Press - under Done. go to a website If a message contains one or more website URLs, you can go to that website. 1 View the message. 2 Highlight the website URL you want to go 3 Press M >...
3 Select Delete Picture or Delete Audio. save attachments 1 View the message. 2 Highlight the attachment you want to save. 3 Press M > Save Attachment. Selected items save to the default storage location. Note: Some types of pictures and audio recordings can be viewed or played, but not saved.
Page 44
customize MMS Find it: M > Messages > M > Setup. This option is available from many context- sensitive menus when you are using MMS. The Setup menu lets you customize MMS for your handset with the following options: option Friendly Name: Enter text here to create a friendly name.
Page 45
create quick notes 1 From the Setup menu, select Quick Notes or Replies. 2 Select [New QuickNote] or [New Reply]. 3 Enter text from the keypad and press O. edit quick notes You can edit only Quick Notes and reply phrases you have created.
Find it: M > Messages > M > Setup > 1 Select Inbox or Sent Items. 2 Choose a clean up option from the following list option Off: Messages are never automatically deleted. 5 Messages: If you have more than 5 messages, messages are deleted in the order they were received, starting with the oldest, until 5 are left.
Find it: M > Profiles > Surveillance. 1 Insert the earpiece or headset when prompted to do so and press O. Note: Surveillance profile works better with a Motorola Original Earpiece for concealed hands-free operation and high audio quality, sold separately.
basics See page 1 for a basic phone diagram. display The home screen shows when you turn on the phone. To dial a number from the home screen, press number keys and O. Note: Your home screen may look different. Time &...
2 Active Phone Line: 1 indicates phone line 1 is ready to make calls; 2 indicates phone line 2 is ready to make calls. 3 Speaker Off: Sounds associated with Private calls and group calls are set to come through the earpiece rather than through the speaker.
2 Select one of the following options: entry modes Press a key several times for Alpha each characters. Enter words using a predictive Word text entering system that lets you enter a word with fewer key presses. Enter symbols. Symbols Enter numbers by pressing the Numeric numbers on the keypad.
3 To accept a word and insert a space, press #. To accept a word completion (such as Billion when you entered Bill), press right. alpha mode To enter characters by tapping the keypad: 1 Select the Alpha mode. 2 Press the corresponding keys repeatedly until the desired letter appears.
navigation key Press the navigation key up, down, left, or right to scroll to items in the display. When you scroll to something, press O. handsfree speaker You can use your phone’s handsfree speaker to make calls without holding the phone to your ear.
features for the hearing impaired using your phone with a hearing aid For best results use the following optimization procedures and handset setting. They generally apply as well for users with cochlear implants: optimize your handset position and orientation While in a phone call slide your phone up and down, then left and right until best microphone coupling is obtained.
Page 54
Approximate telecoil location is within 6 -13 mm of this location. Approximate telecoil location is just above the battery. optimize your handset antenna position Your phone’s rating for Hearing Aid compatibility is determined with the antenna extended if it has an extendable antenna. However, acceptable use might occur with the antenna retracted.
calls To make and answer calls, see page 15. recent calls The recent calls list contains information associated with calls you have made and received and call alerts you have received. When you send or receive Private calls, the recent call list contains the following PTV items with those calls: •...
3 If Store is not one or your options, press M > Update Contacts. And select the contact you want to update. 4 Press - under Save to save your changes. redial To redial your last outgoing call, press and hold O.
2 You can specify a forwarding number for each type of missed call by selecting Detailed and choosing the following options: If Busy: When your handset is on a call or transferring data. If No Answer: When you do not answer on the first 4 rings.
Note: Emergency numbers vary by country. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues. Emergency phone calls can be made even when your SIM card is blocked or not in your phone.
speed dial Each phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number. 1 From the idle screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call. 2 Press #.
selective dynamic group (SDG) calls A SDG call is similar to a Private call, but is made to all members of a SDG list at once. A SDG list is a group of Private IDs that you create using your phone. A SDG list must contain at least 2 members and can contain up to 20 members.
Page 61
3 Add Private IDs. See “Adding Private Numbers” below. 4 If you want to create a voice name for the SDG list, select [Options] > Voice Name. As directed by the screen prompts, say and repeat the voice name you want to assign to the SDG list.
Page 62
add members manually from the keypad 1 While creating a SDG list, select [Add Number]. 2 Enter the Private number using the keypad. remove members or SDG lists remove a member from a SDG list 1 From Contacts, scroll to the SDG list you want to delete the member from.
Page 63
From the home screen, press the number on your keypad for the shortcut you assigned to the SDG list you want. Enter or select a Private ID and add more Private IDs. “start a SDG call with a private” below. 2 Push the PTT button.
• The name of the SDG list • The name or the Private ID of the person speaking • The number of participants in the SDG call SDG Call Details During a SDG call, you can view details about the other SDG list members, such as their name or Private ID, and their status on the call.
Page 65
MOTOtalk allows you to use code or private mode operation, use up to 10 channels and communicate with standalone MOTOtalk radios. Note: MOTOtalk is not compatible with older Family Radio Services products. The following features and main menu items will not be available while in MOTOtalk mode: •...
exit MOTOtalk Find it: M > MT Options > Exit MOTOtalk. The following message displays: Switching to Network Please Wait displays. After a few seconds, the network idle screen appears. channels and codes Your phone has 10 channels and 15 codes. Channels are divided into sets of frequencies that allow you to make and receive MOTOtalk calls.
Page 67
3 Select a code number from 1 to 15 or one of the following options: option Receive All Sets your phone to receive MOTOtalk transmissions from any phone that is set to the same channel, regardless of the code (1-15). When you receive transmissions with the code set to Receive All, the display changes from Receive All to the code on which the transmission was received.
Page 68
make and receive code calls in MOTOtalk To make a code call in MOTOtalk: 1 Push and hold the PTT button. MT Transmit appears on the first line of display. Begin speaking after your phone emits the MOTOtalk tone. 2 Release the PTT button to listen. Note: The tone emitted from your phone when using MOTOtalk is 4 beeps and sounds different from the standard tone...
2 You can reply within 6 seconds simply by pushing the PTT button. end a private MOTOtalk call A private MOTOtalk call will end if there is no communication for 6 seconds. Note: A private MOTOtalk call may be interrupted during the 6 second idle time by another code call or private call.
Page 70
The following options become available: option Direct Launch Launchs your phone directly into MOTOtalk when you select MOTOtalk from the Main Menu. If Direct Launch is set to On, you will not see MT Options when you select MOTOtalk from the main menu.
customize volume Press the volume keys to: • turn off an incoming call alert • change the earpiece volume during calls • change the ringer volume from the home screen Tip: You can quickly set your ringer to VibeAll by pressing and holding the volume key down in the home screen.
making a sound; Silent sets your phone to neither vibrate nor make a sound. Tip: Highlighting a ring tone lets you hear 3 Select the features you want to assign the ring tone to. 4 When you are finished, press - under Done.
wallpaper Set a photo or picture as a wallpaper (background) image in your phone’s home screen or throughout all menu screens. Find it: M > Settings > Display/Info > Wallpaper. To select a wallpaper image scroll through the list of pictures and press O to select the picture of your choice.
hide or show location information Your phone is equipped with a Location feature for use in connection with location- based services that may be available in the future. The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except 911.
other features advanced calling feature call waiting To accept the second call and put the active call on hold press - under Yes. To accept the second call and end the active call press Your phone rings with the second call for you to answer.
feature flip To make your handset to activation answer and end calls by opening and closing the flip press M > Settings > Phone Calls > Flip Activation. Select Flip To Ans > On and Flip to End > On. any key To answer phone calls by pressing any key on the...
datebook feature To create a new Datebook create datebook event press M > Datebook > events [New Event]. see datebook To see a calendar event event press M > Datebook. Press left or right to see the day and see the events. event When an event reminder reminder...
feature set GPS To set the level of privacy privacy for your GPS system press options M > GPS > Privacy. If your GPS PIN security feature is enabled, enter your GPS PIN and select the privacy option you want. change GPS Note: When you receive your phone, your GPS PIN is...
For a list of complete PC other PC applications visit applications www.motorola.com/iden personalize feature Set menu language: language Press M > Settings > Display/ Info > Language Select how long the display...
feature From the home screen turn On TTY feature press M > Settings > Phone Calls > TTY > Use TTY > On. choose TTY From the home screen mode press M > Settings > Phone Calls > TTY > Type. Select from TTY, VCO or HCO.
Page 81
still rings or vibrates for incoming calls or messages, but you need to unlock it to answer. other features - security...
RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.
Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the radio product in the intended use positions along...
Follow Instructions to Avoid Interference Problems Turn OFF your radio product where posted notices instruct you to do so. In an aircraft, turn off your radio product whenever instructed to do so by airline staff. If your radio product offers an airplane mode or similar feature, consult airline staff about using it in flight.
Responsible driving practices can be found in the “Smart Practices While Driving” section at the end of this guide and/or at the Motorola Web site: www.motorola.com/callsmart. Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you can’t concentrate on driving.
Symbol Definition Do not let your battery, charger, or phone get wet. Listening at full volume to music or voice through a headset may damage your hearing. Choking Hazards Your portable radio or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your device and its accessories away from small children.
Service & Repairs If you have questions or need assistance, we’re here to help. Go to www.motorola.com/iden, where you can select from a number of customer care options. You can also contact the Export Law Assurances Export Law This product is controlled under the export regulations of the United States of America and Canada.
Specific Absorption Rate Data ALL MODELS WITH FCC ID AZ489FT5844 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.
The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. 2. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
• the battery capacity falls below 80% of rated capacity, or • the battery develops leakage. MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty.
MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty.
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user...
Page 95
MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall...
Hearing Aid Compatibility A number of Motorola phones have been tested for hearing aid compatibility. When some wireless phones are used with certain hearing aids, users may detect a noise which can interfere with the effectiveness of the hearing aid.
Page 97
Thus, if you use an M3 phone with a M3 hearing aid you will have a combined rating of six for “excellent use.” This methodology applies equally for T ratings. More information about hearing aid compatibility may be found at: www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and www.hearingloss.org/learn/cellphonetech.asp Export Law...
Motosupport/source/registration.asp Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage.
It's easy. To learn more about CTIA's Recycling Program for Used Wireless Devices, please visit us at: http://recycling.motorola.young-america.com/ index.html Recycling...
Lock your device’s keypad where this feature is available. • Keep software up to date: If Motorola or a software/application vendor releases a patch or software fix for your phone which updates the device’s security, install it as soon as possible.
If you choose to use your phone while driving, remember the following tips: • Get to know your Motorola phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
• Use your phone to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.** •...
Page 104
index accessories 9, 41 active phone line 43 advanced calling 69 3-way calls 69 call waiting 69 airplane mode 46 alert set 65, 66 turn off 65 answer a call 15 backlight 73 battery 13, 14 battery indicator 43 call answer 15 any key answer 70 end 15...
Page 105
end key 15 export regulations 83 flip 15 flip activation 70 frequently asked questions service and repairs 83 GPS 71 approximate location 71 privacy options 72 GPS enabled emergency calls 52 GPS, see GPS enabled handsfree 72 auto answer 73 speaker-phone 72 handsfree speaker 46 Hearing Aid...
Page 106
one touch PTT 27 optional accessory 9, 41 optional feature 9 packet data 43 PC applications 73 personalize 73 phone number 18 picture ID 50 power key 14 private calls answer 16 PTV features 23 send My Info 25 send pictures 23 quick PTT 27 radio frequency 78 received calls 49...
Page 107
store your number 18 surveillance profile 41 tap text entry mode 45 text 18 text entry 43 text messages 18 creating 20 deleting 21 drafts 20 memory 21 message center 19 receiving 19 resend messages 21 sending 20 sent messages 21 setting up 18 TTY calls 74 turn on/off 14...