Related Manuals for Mitsubishi Electric PK10
Summary of Contents for Mitsubishi Electric PK10
- Page 1 LED Projector "Pocket" MODEL PK10 User Manual This User Manual is important to you. Please read it before using your projector. EN-1...
- Page 2 EN-2...
- Page 3 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)
- Page 4 Equipment, ANSI/NFPA 75. When using the projector in Europe: COMPLIANCE NOTICE This Projector complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/ EEC.
-
Page 5: Table Of Contents
Menu operation...23 Image adjustment...26 Troubleshooting...28 Maintenance...32 Indicators...33 Specifications...35 Declaration of Conformity Model Number : PK10 Trade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A Telephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules. -
Page 6: Important Safeguards
7. Water and moisture Do not use this projector near water or in contact with water. Never use the product if drop it in water. EN-6 Do not place this projector on an unstable cart, stand, tripod, bracket or table. - Page 7 Never push objects of any kind through openings of this projector as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector, adaptor or battery. 14. Servicing Do not attempt to service this projector yourself.
- Page 8 If the projector is dropped and the cabinet is damaged, unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the damaged projector. Do not face the projection lens to the sun.
- Page 9 Place of installation For safety’s sake, do not use the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below. Operating temperature: between +41°F (+5°C) and +95°F (+35°C)
-
Page 10: Overview
Overview 1 Focus ring 2 Control panel 3 Terminal cover 4 Terminal board 5 Air outlet grille 6 Lens 7 Kensington lock 8 Remote control sensor (Rear side only) 9 Air inlet grille EN-10 Control panel 1 LAMP indicator 2 POWER indicator 3 CHARGE indicator 4 Four directional buttons 5 ENTER button... -
Page 11: Power Supply
The projector must be used with specified Lithium-ion rechargeable battery (BT-PK10R 283P076-10). Charge the battery before using the projector for the first time use. Using the projector for charging the battery. You may also use the projector when charging the battery. - Page 12 AC adapter. Warning: Do not change the battery except this method. It may cause battery exploding. Do not remove the battery from the projector when operating. When remove the battery from the projector, power off the projector and unplug AC adaptor.
-
Page 13: Remote Control (Optional Accessory)
(optional accessory) 1 Power button 2 Four directional buttons 3 Enter button 4 Menu button 5 Keystone buttons 6 Hi-Bright button 7 Computer button 8 Video button 9 Blank button 1 0 Still button 1 1 4:3/16:9 button 1 2 Auto button For the first time use: Remove the transparent insulation tape by pulling it... -
Page 14: Operating Range
The projector will not function if there are objects between the remote control and the remote sensor on the projector or if strong light falls on the remote sensor. A weak battery will also prevent the projector from operating. -
Page 15: Installation
Image size varies depending on the distance between the screen and the projector. Front projection L : Between the screen and the front edge of the projector A : Hight of the projected image under the horizontal line Optical offset:... -
Page 16: Basic Connections
Important: Make sure that the connected device is turned off before starting connection. Plug in the AC adapter of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord. When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference. -
Page 17: For Macintosh
If your Macintosh has no video port, a monitor output adapter is required. Contact your dealer for further information. Some Macintoshes require a MAC adapter for the RGB cable for connection with this projector. Contact your dealer for further information. EN-17... -
Page 18: Preparation
The POWER indicator lights red when using the AC adapter. Warning: Do not look into the lens directly when the projector is Use 100-240 V AC 50/60 Hz to prevent fire or electric shock. Do not place any objects on the AC adapter and power cord or do not place the projector near heat sources to prevent damage to the power cord. - Page 19 Important: When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesn’t mean a projection angle. The allowable range of the adjustment value in the keystone adjustment varies depending on the installation conditions. When the keystone adjustment takes effect, the resolution decreases. In addition, stripes may appear or straight lines may bend in images with complicated patterns.
-
Page 20: Basic Operation
On the control panel EN-20 Power-on 1. Turn on the device connected to the projector first. 2. Plug the AC adapter in both the projector and the wall outlet. The POWER indicator lights up. The CHARGE indicator lights up when the projector connects with a not fully charged battery. - Page 21 The air outlet fan rotates faster as the temperature around the projector rises. Power-off Use the following procedure to turn off the projector. Do not turn off the projector by unplugging the power cord while the lamp is on. Unplugging while the lamp is on degrades the lamp’s performance and causes failure in the projector.
-
Page 22: On The Remote Control
KEYSTONE button Press the KEYSTONE or KEYSTONE distortion caused by tilting the projector. Important: Keystone adjustment is available for the keystone distortion in a slant angle of + _ 15 degrees. Keystone adjustment will not change the shape of the menus, the start-up screen, and the background (with no signal input). -
Page 23: Menu Operation
Menu operation IMAGE CONTRAST BRIGHTNESS COLOR TEMP COLOR TINT SHARPNESS GAMMA MODE KEYSTONE INSTALLATION IMAGE REVERSE LAMP HOUR ELAPSE OFF, ON -30 - +30 -30 - +30 FEATURE STANDARD -30 - +30 -30 - +30 HIGH -30 - +30 USER -30 - +30 -30 - +30 -5 - +5... - Page 24 (±15°). IMAGE REVERSE...Use to reverse the projected image. Select MIRROR for rear projection with the tabletop-mounted projector. Select MIRROR INVERT for front projection with the ceiling- mounted projector. LAMP HOUR ELAPSE...Displays the lamp’s elapsed operating time (in hours and...
- Page 25 VERT. POSITION... Use to adjust the vertical position of the image. FINE SYNC... Use to synchronize the projector with the PC input signal so that the image is not blurred. TRACKING... Use to eliminate image noise such as wide stripes.
-
Page 26: Image Adjustment
EN-26 Adjustment of the image from the computer This projector adjusts the format of the video signal supplied from the computer. However, sometimes images button are not projected correctly owing to the type of the button to reduce it. -
Page 27: Simple Adjustment Method
Simple adjustment method 1. Select HORIZ. POSITION in the SIGNAL menu. 2. Press the button to adjust the horizontal start position (or the left side of the image). 3. Select TRACKING in the SIGNAL menu. 4. Press the button to adjust the horizontal end position (or the right edge of the image). 5. -
Page 28: Troubleshooting
4. Plug the power cord into the wall outlet. 5. Press the POWER button. Check that the battery or power cord connected with the projector correctly. Connect the power cord to the projector. Plug the power cord into a wall outlet. -
Page 29: Images Aren't Projected Correctly
Adjust the projector and the screen so that they are perpendicular to each other. This symptom is normal for a DLP projector and is not a malfunction. (A very small number of pixels may stay lit or out, but such sympton is not a malfunction. Pixels of 99.99% or more are effective.) - Page 30 This is caused by the computer being used. Contact the manufacturer of your computer. Match the output resolution of your computer with the resolution of the projector. For the method to change the output resolution of the computer, contact the manufacturer of your computer.
- Page 31 The remote control doesn’t function easily at all. Cause and solution This air comes out as a result of cooling the inside of the projector. This isn’t a product malfunction. The microcomputers inside the projector may be wrongly operating because of noise.
-
Page 32: Maintenance
Cleaning of the projector and the ventilation slots Use a soft cloth to clean the projector and the ventilation grilles. When the grilles become dirty, wipe them with a soft cloth dampened with diluted mild detergent, and then wipe them with a dry cloth. -
Page 33: Indicators
Indicators This projector has three indicators, each of which shows the operation condition of the projector. The following offer solutions to possible problems. If these problem persist, turn the projector off and consult your appliance dealer. Normal condition (AC Adaptor only) -
Page 34: Abnormal Condition
Normal condition (Battery only) LAMP (Green) Abnormal condition LAMP (Red) Flashing x 1 Flashing x 2 Flashing x3 EN-34 CHARGE (Red) POWER (Red) Flashing x 10 CHARGE (Red) POWER (Red) Off x 1 (Flashing) Off x 3 (Flashing) Off x 4 (Flashing) CONDITION System ON System standby... -
Page 35: Specifications
72.8 inch + 72.8 inch (1.85m + 1.85m) Temperature, humidity +41°F (+5°C) - +95°F (+35°C), maximum 85% (performance guaranteed) The specifications and outside appearance of the projector are subject to change without prior notice. projector 640 x 480 800 x 600... -
Page 36: Kensington Lock
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact Kensington Technology Group below. -
Page 37: Optional Accessories
What’s included in the box 1 Soft Carrying Bag 1 CD ROM (User manual) 1 Quick Reference Guide 1 Composite Video Cable 1 AC Adaptor 1 Power Cord It depends on different counties or areas, only 1 cord is included. Optional accessories 1 Remote Control 1 Lithium-ion Rechargeable Battery BT-PK10R... - Page 38 Specification of RGB signals in each computermode of the projector Signal mode Resolution (H x V) VGA 60 640 x 350 VGA 85 640 x 350 VGA mode3 640 x 480 640 x 480 VGA VESA 72 640 x 480...
- Page 39 1920 x1080 Important: Some computers aren’t compatible with the projector. The projector’s maximum resolution is 800 x 600 pixels. It may not display images of higher resolutions than 800 x 600 correctly. Images with SYNC on G (Green) signal may jitter.
- Page 40 North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.ca Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada Sales & Technical Inquires Phone :+1-(800) 450-6487 Fax :+1-(905) 475-7958 E-mail :projectors@mitsubishielectric.ca Customer Care E-mail :support@mitsubishielectric.ca MDEA (Mitsubishi Digital Electronics America, Inc.) (Warranty Registration) http://www.mitsubishi-presentations.com/ Presentation Products Division, 9351 Jeronimo Road,...
- Page 41 Sales & Technical Inquiries Phone :+39-(0)39-60531 Fax :+39-(0)39-6053214 E-mail :info.projector@it.mee.com MEU-NL (Mitsubishi Electric Europe B.V. Benelux Branch) http://www.mitsubishi.nl/LCD/ProdFrame.html Nijverheidsweg 23A, 3641 RP Mijdrecht, The Netherlands Sales Inquiries Phone :+31-297-282461 Fax :+31-297-283936 E-mail :info@mitsubishi.nl Techinical Inquiries Phone :+31-297-282461 Fax :+31-297-283936 E-mail :info@mitsubishi.nl Russia (Mitsubishi Electric Europe B.V Moscow...
- Page 42 Sales Inquiries Phone :+86(21) 5211-0882-3010 Fax :+86(21) 5211-0576 Technical Inquiries Phone :+86(21) 5211-0882-3018 Fax :+86(21) 5211-0576 HONG KONG (Mitsubishi Electric Ryoden Air-Conditioning & Visual Information Systems (HongKong) Ltd.) 7th Floor, Manulife Tower, 169 Electric Road, North Point, Hong Kong Sales Inquiries Phone :+852-2510-1505 Fax :+852-2510-0463 Technical Inquiries...
- Page 43 Sales Inquiries Phone :+65-6473-2308 Fax :+65-6475-9503 E-mail :Peripherals@asia.meap.com Technical Inquiries Phone :+65-6470-2666 Fax :+65-6475-9503 STC (Setsuyo Astec Corporation Seoul Branch) 4F,Dongseo Game Channel Bldg,660-11 Deungchon- Dong,Kangseo-Ku, Seoul, Korea Sales & Technical Inqiries Phone :+82-(0)2-2657-9841~3 Fax :+82-(0)2-2657-9900 MALAYSIA (Antah Melco Sales & Services Sdn. Bhd.) 6, Jalan 13/6 46860 Petaling Jaya Selangor, Darul Ehsan, Malaysia Sales &...
- Page 44 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan MITSUBISHI ELECTRIC CORPORATION EN-44...