Table of Contents
Advertisement
4.
Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
memory module slot.
Reverse this procedure to install a memory module.
Carrying Handle (select models only)
Description
Carrying handle (select models only)
Before removing the memory module:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the
device on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first disconnecting the power cord from the AC outlet
and then disconnecting the AC adapter from the device.
4.
Remove the battery (see
5.
If your device has WWAN capability, remove the SIM (see
Remove the memory module:
1.
Remove the mylar screw coverings (1) and remove the two screws that secure the carrying
handle to the device (2).
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
Battery on page
38).
SIM on page
Component replacement procedures
Spare part number
606384-001
39).
41
- Quick Links:
- Battery
- Memory Module
- Mass Storage Devices
- Rtc Battery
Hide quick links:
Advertisement
Table of Contents
