Table of Contents
Advertisement
Computer Setup in SUSE Linux
Starting Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating
system is not working or will not load.
NOTE:
Some of the Computer Setup menu items listed in this guide may not be supported by your
computer.
NOTE:
An external keyboard connected by USB can be used with Computer Setup only if USB
legacy support is enabled.
To start Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
Menu" message is displayed in the lower-left corner of the screen.
2.
Press
Computer Setup menus
The menu tables in this section provide an overview of the Computer Setup options.
NOTE:
Some of the Computer Setup menu items listed in this chapter may not be supported by
your computer.
File menu
Select
System information
Set system date and time
System Diagnostics
Restore defaults
Reset BIOS security to factory default
94
Chapter 5 Computer Setup
f10
to enter BIOS Setup.
esc
while the "Press the ESC key for Startup
To do this
●
View identification information for the computer.
●
View specification information for the processor, cache
and memory size, and system ROM.
Change date and time
●
Set date—MM:DD:YYYY
●
Set time—HH:MM
●
F1—System information
●
F2—Start-up test
●
F3—Run-in test
●
F4—Hard disk test
Replace the configuration settings in Computer Setup with
the original factory settings. (Password settings and security
settings are not changed when you restore the factory
settings.)
Restore the BIOS security settings to the factory default.
- Quick Links:
- Battery
- Memory Module
- Mass Storage Devices
- Rtc Battery
Hide quick links:
Advertisement
Table of Contents
