Table of Contents
Advertisement
What to do if ...
Problem
The oven does not heat up
The oven lighting is not op-
erating
F11 appears in the clock
display
F2 appears in the clock dis-
play
An error code not listed
above appears in the time
display
If you are unable to remedy the problem by following the above suggestions,
please contact your local Service Force Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service engi-
1
neers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be chargeable,
3
even during the warranty period.
Advice on cookers with metal fronts:
3
Because of the cold surface at the front of the cooker, opening the oven door during (or
just after) baking or roasting may cause the glass to steam up.
Possible cause
The oven is not switched on
The clock is not set
The required settings have not
been set
The oven's automatic cut-out
has been triggered.
The fuse in the house's electrical
wiring (fuse box) has been
tripped
The oven bulb is faulty
The meat probe has short
circuited or the plug of the meat
probe is not firmly in position in
the socket
Door not properly closed or door
lock defective
Fault in the electronics
What to do if ...
Remedy
Switch the oven on
Set the current time on the clock
Check the settings
See Automatic cut-out
Check fuse. If the fuses trip re-
peatedly, please call an author-
ised electrician
Change the oven bulb
Insert the plug of the meat
probe as far as it will go into the
socket on the side wall of the
oven
Close door properly;
Turn the appliance off and on
again via the house fuse or the
safety switch in the fuse box;
If displayed again, please contact
the Customer Care Department
Switch off the appliance via the
house fuse or the safety switch
in the fuse box and switch it on
again
If displayed again, please contact
your local Service Force Centre
49
Advertisement
Table of Contents
