Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > IMG-MCON
REDU-CNT
2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
VP-ART
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
VP-TXT
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set toner deposit amount limt at clr adj
To set whether to limit the toner deposit amount at color adjustment (color balance, fine adjustment
of density).
When 0 is set, the color adjustment value is reflected to an image precisely, but toner scattering
in the Transfer Assembly and Fixing Assembly might occur, and paper might wind around the
Fixing Assembly.
- Upon user's request
- When reflecting the color adjustment value to an image precisely
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When 0 is set, toner scattering in the Transfer Assembly and Fixing Assembly might occur, and
paper might wind around the Fixing Assembly.
0 to 1
0: Toner deposit amount is not limited.
1: Toner deposit amount is limited to the specified amount.
1
Setting of line art processing
To set outline processing for line art on scalable PDF.
In the outline processing, a binary image outline is extracted in the field which is recognized as
line art, and is converted into vector data.
Specify whether to convert the binary image outline into vector data or to recognize it as one line
(as a thin line). For the thin line, the line width can be specified.
Change this value when you want to obtain an output of a wide-width line as one line rather than
as an outline (when you want to prioritize edit operation as a line rather than image quality).
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 99
1
Setting of character vectorization
To set vector conversion processing for text on scalable PDF.
In the vector conversion processing, a binary image outline is extracted in the field which is
recognized as text, and is converted into vector data.
In regular vector conversion, function approximation is not used for small text because the image
quality is not changed.
When the value is changed, function approximation processing is executed for small text, which
realizes smooth text although the image quality is changed.
Change this value when you want to prioritize smoothness in small text.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 99
1
765
8. Service Mode
Advertisement
Table of Contents
Troubleshooting
