Setting After Installation - Canon imageRUNNER ADVANCE DX C357iF Installation Manual
Hide thumbs
Also See for imageRUNNER ADVANCE DX C357iF:
- Faq manual (96 pages) ,
- Service manual (104 pages)
Table of Contents
Advertisement
11.
Setting after Installation
1. Connect the power plug of the host machine to the outlet.
2. Turn ON the main power switch.
3. Eenter service mode and set the value to "1".
COPIER > FUNCTION > INSTALL > NFC-USE
NOTE:
When [System Manager Information Settings] is set, it is required to log in as a system manager in accordance with instructions
of the user administrator.
4. Select [Settings/Registration] > [Management Settings] > [Device Management] > [Use NFC Card Emulation], and
set the item to "ON".
5. Turn OFF and then ON the main power switch.
6. When a message prompting the version update is displayed, press [Update] and automatically update the version
of this equipment.
CAUTION:
It may take time to display the update screen. (Approx. 1 to 2 min.) During this time, do not operate the screen.
7. Check the end of the following service mode.
COPIER > DISPLAY > VERSION > PANEL
If the end is an even number (e.g. 01.26): NFC is not installed.
If the end is an odd number (e.g. 01.27): NFC is installed.
94
3. Host Machine Options
Advertisement
Table of Contents
