Table of Contents
Advertisement
The print area setting screen is displayed.
5.
Specify the print area, then press the OK button.
Use the
button to select Outer circle or Inner circle and use the
area.
Note
Measure the outer and inner diameters of the printing surface of the printable disc and make
sure you set a value smaller than the measured value for the outer diameter, and a value larger
than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
6.
Use the
button to select a printable disc type, then press the OK button.
Note
If your printable disc is the recommended disc, specify Recommended disc for the suitable
density printing. If not, specify Other disc.
7.
Follow the on-screen instructions to load the copy source BD/DVD/CD on the
Platen Glass, then press the OK button.
The print setting confirmation screen is displayed.
Important
Be sure to load the copy source BD/DVD/CD with its label side down on the center of the Platen
Glass. If you load it near the edge of the Platen Glass, part of the image may be cut off.
button to change the print
Hide quick links:
Advertisement
Table of Contents
