-A resolution of UFRII LT can be set to either 600 dpi (128MB) or 600/1200dpi (256MB) depending on the memory installed. The 256MB RAM bundled with the
PCL_PRINTER_KIT-J1kit is the same one as a 256MB RAM, which is set as iR 256MB Expansion RAM-D1(0449B001AA).
-License authentication is not necessarily conducted at the time of installation.
-In order to use UFRII LT, the Network board supplied with the kit is necessary.
-PCL Printer Kit-J1 should be installed after installing UFRII LT.
Main body configuration and Accessories
In iR2020/2016, some models that have not been provided with extended capabilities at shipment are either the ones that system accessories can be added or the
others that they cannot be done.
The followings are the models that accessories cannot be added.
Merchandise control name iR2020J
Point of destination
Product number of main
body
UFRII LT Printer kit-J2
Network Board
PCL Printer kit-J1
256MB RAM
*TBD: to be determied
The followings are the models that accessories can be added.
iR2016(Upgradeable Model)
16ppm
Merchandise control name
Point of destination
Product number of main body
UFRII LT Printer kit-J2
Network Board
PCL Printer kit-J1
256MB RAM*
The 256MB RAM bundled with the PCL_PRINTER_KIT-J1kit is the same one as a 256MB RAM, which is set as iR 256MB Expansion RAM-D1(0449B001AA).